/home/laradmin/lar/sensors/camera/xb3/triclops/include/triclopsstereo.h
Go to the documentation of this file.00001 /************************************************************************************************** 00002 Software License Agreement (BSD License) 00003 00004 Copyright (c) 2011-2013, LAR toolkit developers - University of Aveiro - http://lars.mec.ua.pt 00005 All rights reserved. 00006 00007 Redistribution and use in source and binary forms, with or without modification, are permitted 00008 provided that the following conditions are met: 00009 00010 *Redistributions of source code must retain the above copyright notice, this list of 00011 conditions and the following disclaimer. 00012 *Redistributions in binary form must reproduce the above copyright notice, this list of 00013 conditions and the following disclaimer in the documentation and/or other materials provided 00014 with the distribution. 00015 *Neither the name of the University of Aveiro nor the names of its contributors may be used to 00016 endorse or promote products derived from this software without specific prior written permission. 00017 00018 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 00019 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 00020 FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 00021 CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 00022 DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 00023 DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 00024 IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 00025 OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 00026 ***************************************************************************************************/ 00032 //============================================================================= 00033 // Copyright � 2004 Point Grey Research, Inc. All Rights Reserved. 00034 // 00035 // This software is the confidential and proprietary information of Point 00036 // Grey Research, Inc. ("Confidential Information"). You shall not 00037 // disclose such Confidential Information and shall use it only in 00038 // accordance with the terms of the license agreement you entered into 00039 // with Point Grey Research, Inc. (PGR). 00040 // 00041 // PGR MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE SUITABILITY OF THE 00042 // SOFTWARE, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE 00043 // IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 00044 // PURPOSE, OR NON-INFRINGEMENT. PGR SHALL NOT BE LIABLE FOR ANY DAMAGES 00045 // SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING 00046 // THIS SOFTWARE OR ITS DERIVATIVES. 00047 // 00048 //============================================================================= 00049 //============================================================================= 00050 // $Id: triclopsstereo.h,v 2.3 2010/06/21 18:46:08 arturp Exp $ 00051 //============================================================================= 00052 #ifndef TRICLOPSSTEREO_H 00053 #define TRICLOPSSTEREO_H 00054 00055 //============================================================================= 00056 // 00057 // This file defines the API for Stereo related functions in the 00058 // Triclops Stereo Vision SDK. 00059 // 00060 //============================================================================= 00061 00062 00063 //============================================================================= 00064 // Defines 00065 //============================================================================= 00066 00067 //============================================================================= 00068 // System Includes 00069 //============================================================================= 00070 00071 #include <triclops.h> 00072 00073 #ifdef __cplusplus 00074 extern "C" 00075 { 00076 #endif 00077 00078 //============================================================================= 00079 // Macros 00080 //============================================================================= 00081 00082 //============================================================================= 00083 // Enumerations 00084 //============================================================================= 00085 00086 //============================================================================= 00087 // Types 00088 //============================================================================= 00089 // 00090 // Group = Types 00091 00092 // 00093 // Name: TriclopsStereoQuality 00094 // 00095 // Description: 00096 // This enumerated type identifies stereo algorithm used 00097 // to compute the disparity images. In general, the higher quality of algorithm 00098 // chosen, the more processing time required to compute the result. 00099 // 00100 typedef enum TriclopsStereoQuality 00101 { 00102 TriStereoQlty_STANDARD, 00103 TriStereoQlty_ENHANCED 00104 } TriclopsStereoQuality; 00105 00106 // 00107 // Name: TriclopsROI 00108 // 00109 // Description: 00110 // This structure describes a Region Of Interest for selective processing 00111 // of the input images. 00112 // 00113 typedef struct TriclopsROI 00114 { 00115 // The row value for the upper-left corner of the region of interest. 00116 int row; 00117 // The column value for the upper-left corner of the region of interest. 00118 int col; 00119 // The height of the region of interest. 00120 int nrows; 00121 // The width of the region of interest. 00122 int ncols; 00123 00124 } TriclopsROI; 00125 00126 //============================================================================= 00127 // Function Prototypes 00128 //============================================================================= 00129 00130 //============================================================================= 00131 // Stereo 00132 //============================================================================= 00133 // 00134 // Group = Stereo 00135 00136 // 00137 // Name: triclopsGetROIs 00138 // 00139 // Synopsis: 00140 // Retrieves a handle to an array of Regions Of Interest. 00141 // 00142 // Input: 00143 // context - The context. 00144 // 00145 // Output: 00146 // rois - A pointer to a 1D array of ROI structures. 00147 // maxROIs - The maximum number of ROIs allowed. 00148 // 00149 // Returns: 00150 // TriclopsErrorOk - The operation succeeded. 00151 // InvalidContext - The input context was invalid. 00152 // 00153 // Description: 00154 // This function returns a pointer to an array of region of interest (ROI) 00155 // structures. The user may set requested region of interest boundaries in 00156 // this array. The Regions Of Interest that will be valid must begin with 00157 // the 0th element in the array and continue in a contiguous manner. After 00158 // having set the Regions Of Interest, the user must call 00159 // triclopsSetNumberOfROIs() to indicate to the stereo kernel how many ROIs 00160 // he/she wishes processed. Currently, ROIs are only applied during the 00161 // stereo processing, not during preprocessing. 00162 // 00163 // See Also: 00164 // triclopsSetNumberOfROIs(), triclopsStereo(), TriclopsROI 00165 // 00166 TriclopsError 00167 triclopsGetROIs( TriclopsContext context, 00168 TriclopsROI** rois, 00169 int* maxROIs ); 00170 00171 // 00172 // Name: triclopsSetNumberOfROIs 00173 // 00174 // Synopsis: 00175 // Sets the number of Regions Of Interest the user currently wants active. 00176 // 00177 // Input: 00178 // context - The context. 00179 // nrois - Number of ROIs. 00180 // 00181 // Returns: 00182 // TriclopsErrorOk - The operation succeeded. 00183 // InvalidContext - The input context was invalid. 00184 // InvalidSetting - Too many ROIs. 00185 // 00186 // Description: 00187 // This function indicates to the stereo kernel how many ROIs in the ROI array 00188 // will be processed. Before calling this function, the user must first call 00189 // triclopsGetROIs() and set up the ROIs he/she intends to use. If nrois is 00190 // set to 0, the entire image will be processed. This is the default setting. 00191 // 00192 // See Also: 00193 // triclopsGetROIs() 00194 // 00195 TriclopsError 00196 triclopsSetNumberOfROIs( TriclopsContext context, 00197 int nrois ); 00198 00199 00200 // 00201 // Name: triclopsGetMaxThreadCount 00202 // 00203 // Synopsis: 00204 // Retrieves the maximum number of threads used in multi-threaded calls 00205 // 00206 // Input: 00207 // context - The context. 00208 // 00209 // Output: 00210 // rois - A pointer to a 1D array of ROI structures. 00211 // maxROIs - The maximum number of ROIs allowed. 00212 // 00213 // Returns: 00214 // TriclopsErrorOk - The operation succeeded. 00215 // InvalidContext - The input context was invalid. 00216 // 00217 // Description: 00218 // This function returns the maximum number of threads allowed in multuthreaded 00219 // operations. 00220 // 00221 // See Also: 00222 // triclopsSetMaxThreadCount(), triclopsStereo() 00223 // 00224 TriclopsError 00225 triclopsGetMaxThreadCount( TriclopsContext context, int* maxThreadCount ); 00226 00227 // 00228 // Name: triclopsSetMaxThreadCount 00229 // 00230 // Synopsis: 00231 // Sets the maximum number of threads to use in multi-threaded operations 00232 // 00233 // Input: 00234 // context - The context. 00235 // nrois - maximum number of threads (minimum 1) 00236 // 00237 // Returns: 00238 // TriclopsErrorOk - The operation succeeded. 00239 // InvalidContext - The input context was invalid. 00240 // InvalidSetting - Invalid number passed in (less then 1). 00241 // InvalidRequest - the kernel is busy executing in the background 00242 // 00243 // Description: 00244 // This function indicates to the stereo kernel at what number to cap the number 00245 // of threads used in multi-threaded operations. If not set, the kernel will use 00246 // a default number based on the architecture of the machine and the expected 00247 // sppedup. 00248 // 00249 // See Also: 00250 // triclopsGetMaxThreadCount(), triclopsStereo() 00251 // 00252 TriclopsError 00253 triclopsSetMaxThreadCount( TriclopsContext context, int maxThreadCount ); 00254 00255 // 00256 // Name: triclopsSetEdgeCorrelation 00257 // 00258 // Synopsis: 00259 // Turns edge based correlation on or off. 00260 // 00261 // Input: 00262 // context - The context. 00263 // on - A Boolean value indicating whether correlation should be turned on 00264 // or off. 00265 // 00266 // Returns: 00267 // TriclopsErrorOk - The operation succeeded. 00268 // InvalidContext - The input context was invalid. 00269 // 00270 // Description: 00271 // Edge based correlation is required for texture and uniqueness 00272 // validation to be used. 00273 // 00274 // See Also: 00275 // triclopsGetEdgeCorrelation(), triclopsSetTextureValidation(), 00276 // triclopsSetUniquenessValidation() 00277 // 00278 TriclopsError 00279 triclopsSetEdgeCorrelation( TriclopsContext context, 00280 TriclopsBool on ); 00281 00282 // 00283 // Name: triclopsGetEdgeCorrelation 00284 // 00285 // Synopsis: 00286 // Retrieves the state of the edge based correlation flag. 00287 // 00288 // Input: 00289 // context - The context. 00290 // 00291 // Output: 00292 // on - A pointer to a Boolean that will contain the current setting. 00293 // 00294 // Returns: 00295 // TriclopsErrorOk - The operation succeeded. 00296 // InvalidContext - The input context was invalid. 00297 // 00298 // See Also: 00299 // triclopsSetEdgeCorrelation() 00300 // 00301 TriclopsError 00302 triclopsGetEdgeCorrelation( const TriclopsContext context, 00303 TriclopsBool* on ); 00304 00305 // 00306 // Name: triclopsSetEdgeMask 00307 // 00308 // Synopsis: 00309 // Sets the edge detection mask size. 00310 // 00311 // Input: 00312 // context - The context. 00313 // masksize - The new mask size, which is valid between 3 and 11. 00314 // 00315 // Returns: 00316 // TriclopsErrorOk - The operation succeeded. 00317 // InvalidContext - The input context was invalid. 00318 // 00319 // See Also: 00320 // triclopsGetEdgeMask() 00321 // 00322 TriclopsError 00323 triclopsSetEdgeMask( TriclopsContext context, 00324 int masksize ); 00325 00326 // 00327 // Name: triclopsGetEdgeMask 00328 // 00329 // Synopsis: 00330 // Retrieves the edge detection mask size. 00331 // 00332 // Input: 00333 // context - The context. 00334 // 00335 // Output: 00336 // masksize - A pointer to an integer that will contain the current mask size. 00337 // 00338 // Returns: 00339 // TriclopsErrorOk - The operation succeeded. 00340 // InvalidContext - The input context was invalid. 00341 // 00342 // See Also: 00343 // triclopsSetEdgeMask() 00344 // 00345 TriclopsError 00346 triclopsGetEdgeMask( const TriclopsContext context, 00347 int* masksize ); 00348 00349 // 00350 // Name: triclopsSetDoStereo 00351 // 00352 // Synopsis: 00353 // Turns stereo processing on or off. 00354 // 00355 // Input: 00356 // context - The context. 00357 // on - A Boolean indicating whether stereo processing should be turned on 00358 // or off. 00359 // 00360 // Returns: 00361 // TriclopsErrorOk - The operation succeeded. 00362 // InvalidContext - The input context was invalid. 00363 // 00364 // See Also: 00365 // triclopsGetDoStereo(), triclopsSetStereoQuality(), triclopsGetStereoQuality() 00366 // 00367 TriclopsError 00368 triclopsSetDoStereo( TriclopsContext context, 00369 TriclopsBool on ); 00370 00371 // 00372 // Name: triclopsGetDoStereo 00373 // 00374 // Synopsis: 00375 // Retrieves the state of the stereo processing. 00376 // 00377 // Input: 00378 // context - The context. 00379 // 00380 // Output: 00381 // on - A pointer to a Boolean that will store the current setting. 00382 // 00383 // Returns: 00384 // TriclopsErrorOk - The operation succeeded. 00385 // InvalidContext - The input context was invalid. 00386 // 00387 // See Also: 00388 // triclopsSetDoStereo(), triclopsSetStereoQuality(), triclopsGetStereoQuality() 00389 // 00390 TriclopsError 00391 triclopsGetDoStereo( const TriclopsContext context, 00392 TriclopsBool* on ); 00393 00394 // 00395 // Name: triclopsSetStereoQuality 00396 // 00397 // Description: 00398 // Sets the quality of the stereo algorithm to use during stereo processing. 00399 // Higher-quality algorithms will generally require more processing time, but 00400 // give more accurate and/or more complete results. Currently available are 00401 // TriStereoQlty_STANDARD, our classic stereo algorithm, and 00402 // TriStereoQlty_ENHANCED, which provides a more reliable sub-pixel disparity 00403 // estimate. 00404 // 00405 // Input: 00406 // context - The current TriclopsContext. 00407 // quality - The desired quality of the stereo algorithm to use 00408 // 00409 // Returns: 00410 // TriclopsErrorOk - The operation succeeded. 00411 // TriclopsErrorInvalidContext - If the context is invalid. 00412 // 00413 // See Also: 00414 // triclopsGetStereoAlgQuality() 00415 // 00416 TriclopsError 00417 triclopsSetStereoQuality(TriclopsContext context, TriclopsStereoQuality quality); 00418 00419 // 00420 // Name: triclopsGetStereoQuality 00421 // 00422 // Description: 00423 // Gets the quality of the stereo algorithm currently in use for stereo 00424 // processing. 00425 // 00426 // Input: 00427 // context - The current TriclopsContext. 00428 // quality - The quality of the stereo algorithm currently in use. 00429 // 00430 // Returns: 00431 // TriclopsErrorOk - The operation succeeded. 00432 // TriclopsErrorInvalidContext - If the context is invalid. 00433 // 00434 // See Also: 00435 // triclopsSetStereoAlgQuality() 00436 // 00437 TriclopsError 00438 triclopsGetStereoQuality(TriclopsContext context, TriclopsStereoQuality* quality); 00439 00440 // 00441 // Name: triclopsSetSubpixelInterpolation 00442 // 00443 // Synopsis: 00444 // Turns subpixel interpolation stereo improvements on or off. 00445 // 00446 // Input: 00447 // context - The context. 00448 // on - A Boolean indicating whether it should be on or off. 00449 // 00450 // Returns: 00451 // TriclopsErrorOk - The operation succeeded. 00452 // InvalidContext - The input context was invalid. 00453 // 00454 // See Also: 00455 // triclopsGetSubpixelInterpolation(), triclopsSetStrictSubpixelValidation() 00456 // 00457 TriclopsError 00458 triclopsSetSubpixelInterpolation( TriclopsContext context, 00459 TriclopsBool on ); 00460 00461 // 00462 // Name: triclopsGetSubpixelInterpolation 00463 // 00464 // Synopsis: 00465 // Retrieves the state of the subpixel interpolation feature. 00466 // 00467 // Input: 00468 // context - The context. 00469 // 00470 // Output: 00471 // on - A pointer to a Boolean that will store the current setting. 00472 // 00473 // Returns: 00474 // TriclopsErrorOk - The operation succeeded. 00475 // InvalidContext - The specified context was invalid. 00476 // 00477 // See Also 00478 // triclopsSetSubpixelInterpolation(), triclopsSetStrictSubpixelValidation() 00479 // 00480 TriclopsError 00481 triclopsGetSubpixelInterpolation( const TriclopsContext context, 00482 TriclopsBool* on ); 00483 00484 // 00485 // Name: triclopsSetDisparity 00486 // 00487 // Synopsis: 00488 // Sets the disparity range for stereo processing. Currently, the range 00489 // must be such that (maxDisparity-minDisparity<=240) and (maxDisparity<=1024). 00490 // Note that a side-effect of setting maxDisparity > 240 is that the disparity 00491 // offset is set to maxDisparity-240. 00492 // 00493 // Input: 00494 // context - The context. 00495 // minDisparity - The disparity range minimum. 00496 // maxDisparity - The disparity range maximum. 00497 // 00498 // Returns: 00499 // TriclopsErrorOk - The operation succeeded. 00500 // InvalidContext - The input context was invalid. 00501 // 00502 // See Also: 00503 // triclopsGetDisparityOffset. 00504 // 00505 TriclopsError 00506 triclopsSetDisparity( TriclopsContext context, 00507 int minDisparity, 00508 int maxDisparity ); 00509 00510 // 00511 // Name: triclopsGetDisparity 00512 // 00513 // Synopsis: 00514 // Retrieves the disparity range from the given context. 00515 // 00516 // Input: 00517 // context - The context 00518 // 00519 // Output: 00520 // minDisparity - A pointer to an integer that will store the current value. 00521 // maxDisparity - A pointer to an integer that will store the current value. 00522 // 00523 // Returns: 00524 // TriclopsErrorOk - The operation succeeded. 00525 // InvalidContext - The input context was invalid. 00526 // 00527 // See Also: 00528 // triclopsGetDisparityOffset. 00529 // 00530 TriclopsError 00531 triclopsGetDisparity( const TriclopsContext context, 00532 int* minDisparity, 00533 int* maxDisparity ); 00534 00535 // 00536 // Name: triclopsGetDisparityOffset 00537 // 00538 // Synopsis: 00539 // Retrieves the disparity offset from the given context. Adding the disparity 00540 // offset to a valid disparity value from the disparity image gives the 00541 // true disparity value. The disparity offset is set automatically when the 00542 // disparity range is set using triclopsSetDisparity, and is equal to 00543 // MAX( 0, maxDisparity-240). The disparity offset allows the disparity range, 00544 // (which has a maximum extent of 240) to be shifted up away from zero, so 00545 // that objects very close to the camera may be imaged. 00546 // 00547 // Input: 00548 // context - The context 00549 // 00550 // Output: 00551 // nDisparityOffset - A pointer to an integer that will store the current value. 00552 // 00553 // Returns: 00554 // TriclopsErrorOk - The operation succeeded. 00555 // InvalidContext - The input context was invalid. 00556 // 00557 TriclopsError 00558 triclopsGetDisparityOffset( const TriclopsContext context, 00559 int* nDisparityOffset ); 00560 00561 // 00562 // Name: triclopsSetDisparityMappingOn 00563 // 00564 // Synopsis: 00565 // Enables or disables disparity mapping. 00566 // 00567 // Input: 00568 // context - TriclopsContext for the operation. 00569 // on - A Boolean flag indicating if the mapping should be on or off. 00570 // 00571 // Returns: 00572 // TriclopsErrorOk - Operation successful. 00573 // TriclopsErrorInvalidContext - Context is not a valid TriclopsContext. 00574 // 00575 // Description: 00576 // This function is used to enable or disable disparity mapping. See the 00577 // comments section on this subject in Chapter 7 in the Triclops manual for 00578 // why disparity mapping can cause trouble. 00579 // 00580 // 00581 TriclopsError 00582 triclopsSetDisparityMappingOn( TriclopsContext context, 00583 TriclopsBool on ); 00584 00585 // 00586 // Name: triclopsGetDisparityMappingOn 00587 // 00588 // Synopsis: 00589 // Retrieves the current setting. 00590 // 00591 // Input: 00592 // context - TriclopsContext for the operation. 00593 // 00594 // Output: 00595 // on - A pointer that will contain the current value of this flag. 00596 // 00597 // Returns: 00598 // TriclopsErrorOk - Operation successful. 00599 // TriclopsErrorInvalidContext - Context is not a valid TriclopsContext. 00600 // 00601 // Description: 00602 // This function is used to extract the current disparity mapping setting. 00603 // 00604 // See Also: 00605 // triclopsSetDisparityMappingOn. 00606 // 00607 TriclopsError 00608 triclopsGetDisparityMappingOn( TriclopsContext context, 00609 TriclopsBool* on ); 00610 00611 // 00612 // Name: triclopsSetDisparityMapping 00613 // 00614 // Synopsis: 00615 // Sets the disparity range for stereo processing. 00616 // 00617 // Input: 00618 // context - The context. 00619 // minDisparity - The disparity range in the output disparity image minimum. 00620 // The range is between 0 and 255. 00621 // maxDisparity - The disparity range in the output disparity image maximum. 00622 // The range is between 0 and 255. 00623 // 00624 // Returns: 00625 // TriclopsErrorOk - The operation succeeded. 00626 // InvalidContext - The input context was invalid. 00627 // 00628 // Description: 00629 // This function sets the disparity mapping values. The disparity mapping 00630 // values control what range of pixels values appear in the output disparity 00631 // image. The true disparity ranges between the minimum and maximum values 00632 // set with triclopsSetDisparity(). The output image has its pixel values 00633 // linearly scaled from minimum => maximum disparity to minimum => maximum 00634 // disparity mapping. This is primarily used when one wishes to use a screen 00635 // display buffer as the disparity image buffer. Note: it is advisable to 00636 // set the disparity mapping to the exact values of the input disparities if 00637 // one is not using the screen buffer display feature. 00638 // 00639 // See Also: 00640 // triclopsGetDisparityMapping(), triclopsSetDisparity(), triclopsRCD8ToXYZ(), 00641 // triclopsRCD16ToXYZ(), triclopsRCDMappedToXYZ() 00642 // 00643 TriclopsError 00644 triclopsSetDisparityMapping( TriclopsContext context, 00645 unsigned char minDisparity, 00646 unsigned char maxDisparity ); 00647 00648 // 00649 // Name: triclopsGetDisparityMapping 00650 // 00651 // Synopsis: 00652 // Retrieves the disparity range from the given context. 00653 // 00654 // Input: 00655 // context - The context. 00656 // 00657 // Output: 00658 // minDisparity - The disparity range in the output disparity image minimum. 00659 // maxDisparity - The disparity range in the output disparity image maximum. 00660 // 00661 // Returns: 00662 // TriclopsErrorOk - The operation succeeded. 00663 // InvalidContext - The input context was invalid. 00664 // 00665 // See Also: 00666 // triclopsSetDisparityMapping(), triclopsSetDisparity() 00667 // 00668 TriclopsError 00669 triclopsGetDisparityMapping( const TriclopsContext context, 00670 unsigned char* minDisparity, 00671 unsigned char* maxDisparity ); 00672 00673 // 00674 // Name: triclopsSetStereoMask 00675 // 00676 // Synopsis: 00677 // Set the stereo correlation mask size. 00678 // 00679 // Input: 00680 // context - The context. 00681 // masksize - The new correlation mask size, which is valid between 1 and 15. 00682 // 00683 // Returns: 00684 // TriclopsErrorOk - The operation succeeded. 00685 // InvalidContext - The input context was invalid. 00686 // 00687 TriclopsError 00688 triclopsSetStereoMask( TriclopsContext context, 00689 int masksize ); 00690 00691 // 00692 // Name: triclopsSetAnyStereoMask 00693 // 00694 // Synopsis: 00695 // Allows the user to set stereomask to any size. 00696 // 00697 // Input: 00698 // context - TriclopsContext for the operation. 00699 // size - The size for a new stereo correlation mask. 00700 // 00701 // Returns: 00702 // TriclopsErrorOk - Operation successful. 00703 // TriclopsErrorInvalidContext - Context is not a valid TriclopsContext. 00704 // TriclopsErrorInvalidSetting - A value of less than 1 00705 // 00706 // Description: 00707 // This function allows you to set a stereo correlation mask of any size. 00708 // There is a danger that an internal counter in the stereo correlation 00709 // engine may overflow if mask sizes over 15 are provided. Thus, the 00710 // current limit for triclopsSetStereoMask is 15. However, in practice, 00711 // much larger mask sizes can be used successfully. If an overflow results, 00712 // it may not affect the stereo result, and it will generally only happen for 00713 // pathological cases. Therefore, this function is provided as an 00714 // 'experimental' function to allow users to set any mask size they wish. 00715 // 00716 // See Also: 00717 // triclopsSetStereoMask() 00718 // 00719 TriclopsError 00720 triclopsSetAnyStereoMask( TriclopsContext context, 00721 int size ); 00722 00723 // 00724 // Name: triclopsGetStereoMask 00725 // 00726 // Synopsis: 00727 // Retrieves the stereo correlation mask size. 00728 // 00729 // Input: 00730 // context - The context. 00731 // 00732 // Output: 00733 // size - A pointer to an integer that will store the current value. 00734 // 00735 // Returns: 00736 // TriclopsErrorOk - The operation succeeded. 00737 // InvalidContext - The input context was invalid. 00738 // 00739 TriclopsError 00740 triclopsGetStereoMask( const TriclopsContext context, 00741 int* size ); 00742 00743 // 00744 // Name: triclopsStereo 00745 // 00746 // Synopsis: 00747 // Does stereo processing, validation, and subpixel interpolation, as 00748 // specified by parameters. 00749 // 00750 // Input: 00751 // context - The context. 00752 // 00753 // Returns: 00754 // TriclopsErrorOk - The operation succeeded. 00755 // BadOptions - There are some contradictory options set. 00756 // NotImplemented - The context camera configuration is not supported. 00757 // InvalidROI - A negative dimensioned ROI, or ROI with illegal starting 00758 // positions was inputted. Illegal starting position is a 00759 // upper/left corner that is closer to the right/bottom edge 00760 // of the image than the stereo mask size. 00761 // InvalidRequest - triclopsStereo called before triclopsPreprocess ever called. 00762 // 00763 // Description: 00764 // This function performs the stereo processing and validation, and generates 00765 // the internal image TriImg_DISPARITY. 00766 // 00767 // See Also: 00768 // triclopsPreprocessing(), triclopsSetDoStereo(), triclopsEdgeCorrelation(), 00769 // triclopsSetTextureValidation(), triclopsSetUniquenessValidation(), 00770 // triclopsGetROIs(), triclopsSetSubpixelInterpolation() 00771 // 00772 TriclopsError 00773 triclopsStereo( TriclopsContext context ); 00774 00775 #ifdef __cplusplus 00776 } 00777 #endif 00778 00779 #endif // #ifndef TRICLOPS_H